適用於CWC-EH3010W 淨水過濾花灑蓮蓬頭
花灑頭濾芯棉及手柄濾芯各3件

安裝於手柄的微纖維手柄濾芯（機身沉澱物濾芯），以及安裝於花灑頭頂部的微纖維頭部濾芯

🛠️ 濾芯更換步驟
1. 更換手柄濾芯 (Body/Sediment Filter)
拆卸：將花灑頭手柄的下半部分逆時針旋開。
取出：拿出已經變色（變黃或變黑）的舊沉澱物微纖維濾芯。
安裝：放入全新的手柄濾芯，然後將手柄順時針旋緊即可。

2. 更換頭部濾芯 (Head Fibre Filter)
拆卸：旋開花灑頭前方的出水面蓋（過濾頭蓋）。
清潔抗菌球：取出裡面的半永久陶瓷抗菌球濾芯，放在清水下沖洗乾淨（此部分不需經常更換）。
更換微纖維片：將舊的頭部微纖維過濾片取出，換上新的過濾片。注意：硬面必須朝內安裝，並確保 O 型密封圈位置正確。
復原：將陶瓷球放回，重新旋緊前方面蓋。

⏳ 什麼時候需要更換？
觀察外觀：花灑手柄為透明設計。當看到裡面的白色微纖維濾芯完全變深褐色，或積聚過多鐵鏽污垢時，即代表需要更換。
觀察水壓：如果發現花灑的出水量明顯變小或水壓下降，通常是由於濾芯被雜質堵塞，此時應立即更換新濾芯。


Compatible with CWC-EH3010W Water-Filtering Shower Head
Includes 3 units each of the shower head microfiber filter and the handle filter.

Features a microfiber handle filter (body/sediment filter) installed in the handle and a microfiber head filter installed at the top of the shower head.

🛠️ Filter Replacement
Steps1. Replacing the Handle Filter (Body/Sediment Filter)
Removal: Unscrew the lower section of the shower handle by turning it counter-clockwise.
Removal: Take out the old sediment microfiber filter that has changed color (turned yellow or black).
Installation: Insert the new handle filter, then screw the handle back on tightly by turning it clockwise.

2. Replacing the Head Filter (Head Fibre Filter)
Removal: Unscrew the front spray faceplate (filter head cap) of the shower head. 
Clean Antibacterial Balls: Remove the semi-permanent ceramic antibacterial ball filter cartridge and rinse it thoroughly under clean water (this part does not require frequent replacement).
Replace Microfiber Disc: Remove the old microfiber filter disc from the head and replace it with a new one. Note: The hard side must face inward, and ensure the O-ring is positioned correctly.
Reassembly: Place the ceramic balls back in and screw the front faceplate back on tightly.

⏳ When to Replace?
Visual Inspection: The shower handle features a transparent design. Replacement is necessary when the white microfiber filter inside turns dark brown or accumulates excessive rust and dirt.
Water Pressure Check: If you notice a significant reduction in water flow or a drop in water pressure—usually caused by the filter becoming clogged with impurities—you should replace the filter immediately.